Network

Limitations

Firmware Versions Stock >= 3.0.0.4.380.x Merlin >= 3.0.0.4.380.x

Device mode Available Router 💚 AiMesh Node 💚 Access point 💚 Media bridge 💚

Sensor

{device}_{interface}_download

AsusRouter >= 0.1.0

• Default entity state: Enabled

• Type: float | integer

• Units: [bit, kbit, Mbit, Gbit, B, kB, MB, GB] (how to select)

• Default units: GB

• Details:

  The total amount of traffic downloaded via {interface} since the last reboot of the device or traffic overflow.

  Attributes

  • bytes

    • Type: integer

    • Units: B

    • Details:

      The raw traffic value as obtained from the device.

{device}_{interface}_download_speed

AsusRouter >= 0.1.0

• Default entity state: Enabled

• Type: float | integer

• Units: [bit/s, kbit/s, Mbit/s, Gbit/s, B/s, kB/s, MB/s, GB/s] (how to select)

• Default units: Mbit/s

• Details:

  The average download speed via {interface} over the last t seconds, where t is the time interval between fetching network data.

  The sensor requires 2 consecutive polls of data from the device to start showing an actual state. Until then, the sensor state will be reported as unknown.

  Attributes

  • bytes

    • Type: integer

    • Units: bits/s

    • Details:

      The average speed value as calculated from the traffic.

{device}_{interface}_upload

AsusRouter >= 0.1.0

• Default entity state: Enabled

• Type: float | integer

• Units: [bit, kbit, Mbit, Gbit, B, kB, MB, GB] (how to select)

• Default units: GB

• Details:

  The total amount of traffic uploaded via {interface} since the last reboot of the device or traffic overflow.

  Attributes

  • bytes

    • Type: integer

    • Units: B

    • Details:

      The raw traffic value as obtained from the device.

{device}_{interface}_upload_speed

AsusRouter >= 0.1.0

• Default entity state: Enabled

• Type: float | integer

• Units: [bit/s, kbit/s, Mbit/s, Gbit/s, B/s, kB/s, MB/s, GB/s] (how to select)

• Default units: Mbit/s

• Details:

  The average upload speed via {interface} over the last t seconds, where t is the time interval between fetching network data.

  The sensor requires 2 consecutive polls of data from the device to start showing an actual state. Until then, the sensor state will be reported as unknown.

  Attributes

  • bytes

    • Type: integer

    • Units: bits/s

    • Details:

      The average speed value as calculated from the traffic.